• Electromagnetic Flow Meter with 20in Meter Size
• Pulsed DC magnetic field for zero point stability
• Integral and remote signal converter availability
• Corrosion resistant liners for long life
• Measurement largely independent of flow profile
• User friendly programming procedure
• Empty pipe detection
• Power loss totalization
• Digital signal processor (32-bit)
• Non-volatile programming memory
• Rotating cover
• Calibrated in state-of-the-art facilities
• NSF listed
• CSA certified

• Low Range: 0.10…39.4 ft/s (0.03…12 m/s)
• Accuracy: ± 0.20% of rate ± 1 mm/s
• Repeatability: ± 0.1%
• Power Supply: AC Power Supply: 85…265V AC; Typical Power: 20V A or 15W; Maximum Power: 26V A or 20W; Optional: DC Power Supply: 10…36V DC; Typical Power: 10W; Maximum Power: 14W
• Analog Output: 4…20 mA, 0…20 mA, 0…10 mA, 2…10 mA (programmable and scalable); Voltage sourced 24V DC isolated. Maximum loop resistance < 800 ohms
• Digital Output: Four total, configurable 24V DC sourcing active output (up to 2),100 mA total, 50 mA each; sinking open collector output; (up to four), 30V DC max, 100 mA each; AC solid-state relay (up to 2), 8V AC, 500 mA max
• Digital Input: Max 30V DC (programmable – positive zero return, external totalizer reset or preset batch start)
• Frequency Output:  Scalable up to 10 kHz, open collector up to 1 kHz, solid-state relay
• Misc Output: High/low flow alarm (0…100% of flow), error alarm, empty pipe alarm, flow direction, preset batch alarm, 24V DC supply, ADE
• Communication: RS232 Modbus RTU; RS485 Modbus RTU, HART, Profibus DP require separate daughterboards
• Pulse Width: Scalable up to 10 kHz, passive open collector up to 10 kHz, active switched 24V DC. Up to two outputs (forward and reverse). Pulse width programmable from 1…1000 ms or 50% duty cycle.
• Processing: 32-bit DSP
• Empty Pipe Detection: Field tunable for optimum performance based on specific application
• Excitation Frequency: 1 Hz, 3.75 Hz, 7.5 Hz or 15 Hz (factory optimized to pipe diameter)
• Noise Dampening Programmable: 0…30 seconds
• Low Flow Cut-Off Programmable: 0…10% of maximum flow
• Galvanic Separation: 250V
• Fluid Conductivity: Minimum 5.0 µS/cm (minimum 20 µS/cm for demineralized water)
• Fluid Temperature: With Remote Amplifier: PFA, PTFE & Halar 302° F (150° C); With Meter-Mounted Amplifier: Rubber 178° F, (80° C), PFA, PTFE & Halar 212° F (100° C)
• Ambient Temperature: – 4…140° F (–20…60° C)
• Relative Humidity: Up to 90 percent non-condensing
• Flow Direction: Unidirectional or bidirectional two separate totalizers (programmable)
• Totalization: Programmable/resettable
• Units of Measure: Ounce, pound, liter, US gallon, imperial gallon, barrel, hectoliter, mega gallon, cubic meter, cubic feet, acre feet
• Display: 4 x 20 character display with backlight
• Programming: Three-button, external manual or remote
• Amplifier Housing: Cast aluminum, powder-coated paint
• Detector Housing Standard: Carbon steel welded; Optional: 316 or 304 stainless steel
• Pipe Spool Material: 316 stainless steel
• Flanges Standard: ANSI B16.5 Class 150 RF forged carbon steel; Optional: 300 lb forged carbon steel, 316 or 304 stainless steel
• Pressure Rating: Line sizes up through 24 in: In accordance with ASME B16.5 Class 150 or Flange Rating Class 300; Line sizes greater than 24 in. and through 72 in: AWWA C-207 Class D or Class E Flange Rating
• Liner Material: PFA up to 3/8 in., PTFE 1/2…24 in., soft and hard rubber from 1…54 in., Halar® from 14…40 in.
• Electrode Materials: Standard: Hastelloy C22; Optional: 316 stainless steel, gold/platinum plated, tantalum, platinum/rhodium
• Mounting: Meter mount or remote wall mount (bracket supplied)
• Locations: Indoor and outdoor
• Meter Enclosure Classification: Standard: NEMA 4X (IP66); Optional: Submersible NEMA 6P (IP67), remote amplifier required Junction Box Enclosure
• Junction Box Enclosure Protection: For remote amplifier option: powder-coated die-cast aluminum, NEMA 4 (IP66)
• Cable Entries: 1/2 in. NPT cord grip (3)
• Optional Stainless Steel Grounding Rings:
• Meter Size: Up through 10 in.; Thickness (of one ring): 0.135 in.
• Meter Size: 12…78 in.; Thickness (of one ring): 0.187 in
• NSF Listed: Models with hard rubber liner, 4 in. size and larger; PTFE liner, all sizes
• Token Features: Data Logging (Blue token); Store/Restore (Red token); Firmware Upgrade (Black token)

• (1) Badger Meter M2000 Electromagnetic Flow Meter
• (1) Instruction Manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice